Heat Transfer Color Print (Printed pr/lnft)
SKU:
SX-PMLF-HTCP
$22.00
$22.00
per item
South10 Solvent Heat Transfer Color Print
Printed w/Contour Cut per liner feet
2 Mil gloss white polyurethane with white synthetic liner for printing with solvent or eco-solvent printers. Works with cotton, polyester, spandex and other blended fabrics.
• Thin, thermo-adhesive film made from 100% polyurethane, specially formulated for Solvent or Eco-Solvent printing
• Available in White and 12 fashion finishes, including neons, glow-in-the dark, pearlescent, and glitter
• Print surface is specially designed to produce high-definition prints for transfer to most textile fabrics (not compatible with Nylon)
• Important to use the recommended profile or print settings in order to achieve optimal results
• Print and cut material, right side up. Note: DO NOT REVERSE CUT
• Use Sojar Tape or a high tack adhesive application tape
• Do not remove application tape until graphic has been heat applied to garment
• Set Heat press to 300 – 315 F with firm pressure for 10-15 seconds
• Reheating for 10-15 seconds after removing app tape helps set graphic for greater durability
• Let garment cool before peeling
• Care Instructions, wash inside out, gentle cycle, cold water and tumble dry. Avoid bleach or detergents containing bleach, designed to withstand 50+ washings
Product Code: SX-PMLF-HTCP
Printed w/Contour Cut per liner feet
2 Mil gloss white polyurethane with white synthetic liner for printing with solvent or eco-solvent printers. Works with cotton, polyester, spandex and other blended fabrics.
• Thin, thermo-adhesive film made from 100% polyurethane, specially formulated for Solvent or Eco-Solvent printing
• Available in White and 12 fashion finishes, including neons, glow-in-the dark, pearlescent, and glitter
• Print surface is specially designed to produce high-definition prints for transfer to most textile fabrics (not compatible with Nylon)
• Important to use the recommended profile or print settings in order to achieve optimal results
• Print and cut material, right side up. Note: DO NOT REVERSE CUT
• Use Sojar Tape or a high tack adhesive application tape
• Do not remove application tape until graphic has been heat applied to garment
• Set Heat press to 300 – 315 F with firm pressure for 10-15 seconds
• Reheating for 10-15 seconds after removing app tape helps set graphic for greater durability
• Let garment cool before peeling
• Care Instructions, wash inside out, gentle cycle, cold water and tumble dry. Avoid bleach or detergents containing bleach, designed to withstand 50+ washings
- Printed
- 2 mil
- 24" Wide pr/lnft
- Contour Cut
- Weeded And Masked, ready to press
View similar products:
Product Code: SX-PMLF-HTCP